Happy new year!

Advertisements

Micro Shelters solution for our remote sites ( VHF, MF/HF, UHF, NAVTEX, VTS)

Micro Shelters solution for our remote sites ( VHF, MF/HF, UHF, NAVTEX, VTS)

We pleased to announce that we have Micro Shelters solution for our remote sites ( VHF, MF/HF, UHF, NAVTEX, VTS) with our partner  Micro Shelter Solution.

More information on  https://marcomsrl.es/services/defence-solution/micro-shelters-for-defence-solution/  and  http://www.microsheltersolution.com/

202-modifié.png178b4485-5a14-4dd1-ac8e-9684bad45b24-original.png

thumb (3).png

Doppler Speed log

Display: LCD 7 inch TFT 480х234 pixels

STW Speed: Arrow+Digital Speed Display

Data Output: IEC 61162 – 1 VBW, VLW

Trip Counter Measurement: from 0 to 9999.99 NM

Total Counter Measurement: from 0 to 999999.99NM

Distance Accuracy: 0.2NM or 2%, whichever is greater

Speed Accuracy: 0.2knt or 2%, whichever is greater

Speed Range: -10-+40knt

Power Supply: АС110/220V 50/60Hz

Operating Temp.: -15 to +55″С, 0 to +40’С recommended

Humidity: When 40±3″С, 93%±2°/о relative

Compass Safe Distance Display: STD 1.08m STEER 0.45m

Controller STD 1.32m STEER 0.84m

Protection: Display IP23 Controller IP23

https://marcomsrl.es/services/civil-solution/civil-shipborne-equipment/doppler-speed-log/

7 inch Navigational Sounder

MSDS-207 is one of the echo sounders used in inland river. The echo sounder graphics is continuously shown on 7 inch LCD along with complete navigational details.

2-channels realizes observation of depth detected from different locations of ship. Information from both of two transducers can be dispalyed simultaneously.

● 7inch color TFT LCD

● Shallow depth auto alarm

● Multi-installation modes

● NMEA0183 data output

● Channel: Dual-channels

● Depth range: 0.3m ~ 200m

● Frequency: 200 kHz 

https://marcomsrl.es/services/civil-solution/civil-shipborne-equipment/navigational-echo-sounders/navigational-echo-sounder/7-inch-sounder/

Doppler Speed log

Display: LCD 7 inch TFT 480х234 pixels

STW Speed: Arrow+Digital Speed Display

Data Output: IEC 61162 – 1 VBW, VLW

Trip Counter Measurement: from 0 to 9999.99 NM

Total Counter Measurement: from 0 to 999999.99NM

Distance Accuracy: 0.2NM or 2%, whichever is greater

Speed Accuracy: 0.2knt or 2%, whichever is greater

Speed Range: -10-+40knt

Power Supply: АС110/220V 50/60Hz

Operating Temp.: -15 to +55″С, 0 to +40’С recommended

Humidity: When 40±3″С, 93%±2°/о relative

Compass Safe Distance Display: STD 1.08m STEER 0.45m

Controller STD 1.32m STEER 0.84m

Protection: Display IP23 Controller IP23

https://marcomsrl.es/services/civil-solution/civil-shipborne-equipment/doppler-speed-log/

7 inch Navigational Sounder

MSDS-207 is one of the echo sounders used in inland river. The echo sounder graphics is continuously shown on 7 inch LCD along with complete navigational details.

2-channels realizes observation of depth detected from different locations of ship. Information from both of two transducers can be dispalyed simultaneously.

● 7inch color TFT LCD

● Shallow depth auto alarm

● Multi-installation modes

● NMEA0183 data output

● Channel: Dual-channels

● Depth range: 0.3m ~ 200m

● Frequency: 200 kHz 

https://marcomsrl.es/services/civil-solution/civil-shipborne-equipment/navigational-echo-sounders/navigational-echo-sounder/7-inch-sounder/

AIS Solutions

Marcom Long Range Solution


57b4a4a68bd2fb4252c1f77eb2f63edc.jpg
The Long Range Solution is based on the Marcom AIS Server and Marcom Web VTS products and provides an affordable long-range fleet traffic monitoring and management system for shipping companies.

The Internet-based long-range online AIS marine traffic monitoring and management system assists shipping companies to:

  • Control fleet in real-time at any location
  • Investigate accidents (unlimited history replay function)
  • Receive Actual Time of Arrival notifications at any predefined zone
  • Receive Actual Time of Departure notifications at any predefined zone
  • Obtain Actual Berth Time
  • Calculate an Estimated Time of Arrival to any desired point(s)
  • Send messages to AIS-equipped ships
  • Receive messages from AIS-equipped ships
  • Create sophisticated reports
  • Trigger alarms
  • Make decisions in operational actions

Solution requirements:

  1. The ship must have a PC with satellite Internet connection.
  2. The ship must have an installed AIS transponder.
  3. The AIS transponder must be connected to a PC.

This solution supports S57 and S63 nautical charts, Open Street, Bing and Google maps.

About Marinsys-MF/HF system

Marinsys-MF/HF System


navtex5kw
Marcom Marinsys-MF/HF System consists of Voice operator workstation with Unicom software model NAVIS and MF/HF transmitters with RF power 500W, 1 kW, 2.5 kW, 4 kW, 5kW and 10kW,working at frequency range from 1.6 to 30MHz (1 Hz resolution) connected to System using IP Network.
Marinsys-MF/HF System can be extended with recording & playback unit and radio server with dedicated software.
System can include optional units of PSTN Gateway and Network Monitoring system.

Defence Solutions/Navy Solutions

Shipborne applications

1656858166e4eeffaaa1886ebaa0a2bd

 

Warship AIS Transponder model AMW-1103

According to IMO recommendations, to ensure safe navigation, many vessels are required to be equipped with an AIS (Automatic Identification System) transponder.
This technology, based on the use of GPS receivers, allows automatic position reporting by means of a simple VHF radio transmission. The position and ship identification is made available to all similarly equipped stations within range.
The AMW-1103, made up by the transponder unit AMT-1103 and the display unit MKD-1103, has been designed to implement all the functionalities of a class A AIS station according to the relevant international regulations (ITU-R M.1371 and IEC 61993-2 Ed 2.0 2012). Thus, the AMW-1103 is perfectly capable of interoperating with commercial AIS stations, receiving signals from nearby vessels (class A and B) and other types of AIS stations like Base Stations, Aids to Navigation (AtoNs), Search And Rescue (SAR) aircrafts and Search And Rescue transmitters (SART).
In addition to the standard AIS behaviour, the AMW-1103 implements additional functionalities to support military and police vessels. These Secure Mode functions can be used to stop the standard broadcasting of AIS messages and/or to enable encrypted communications so that only the friendly AIS stations (e.g. other WAIS equipped vessels and base stations sharing the same encoding and password) can decode the information transmitted from the vessel. The DSC receiver can be reserved for encrypted communications on a user specified frequency, if desired. The Secure Mode functions comply with the NATO standardization agreements (STANAG) 4668 and 4669.
All the aspects of the AMW-1103, including the Secure Mode functions, can be configured and turned on or off by using the minimum keyboard & display unit MKD-1103 provided with the AMW-1103. Moreover, the user can access the MKD-1103 to send and receive text and safety messages; the user can also force these messages to be encrypted before being sent.
The AMW-1103 includes an internal GPS receiver to acquire position and time information; this information can be forwarded to other onboard equipment.
The AMW-1103 features a dedicated RTCM port to input DGNSS messages to the unit, enabling corrections to be forwarded to the internal GPS.

General characteristics

  • Compliant with IEC standard 61993-2 Ed 2.0 (2012)
  • 3 VHF receivers and 1 VHF transmitter
  • Transmission of static, dynamic and voyage related information
  • Interface to other shipboard sensors (GPS, compass, etc)
  • Transmission/reception of text messages
  • User Interface (ECDIS, ECS)
  • Long range interface
  • Remote control unit with keyboard & display mod. MKD-1103.
  • DSC compliant
  • Internal DGPS receiver
  • Internal BIIT (Built In Integrity Test)
  • WAIS silent mode, encryption mode and ultra-low power mode for intra-fleet communications
  • Usage of 3rd receiver for the encrypted communications3 VHF receivers and 1 VHF transmitter

Operation modes

  • WAIS fully silent mode
  • WAIS encryption mode
  • WAIS ultra-low power mode

Technical specifications

AMT-1103 Dimensions (w x d x h) 214 x 205 x 56 mm
MKD-1103 Dimensions (w x d x h) 214 x 40 x 205 mm
AMT-1103 Weight 2 Kg
MKD-1103 Weight 1.5 Kg
Power Input 10.8 ÷ 31.2 V DC
VHF Transponder frequency band 155 ÷ 163 MHz
Channel width 25 kHz
RF Power output 1 or 12.5 W (nominal)
Modulation GMSK / FM
Bit rate 9600 bps
Sensitivity -113 dBm @ 20% PER
GPS Receiver Differential, 50 channel
GPS Accuracy (2D) 2.5 m CEP – GPS
1.5 m CEP – DGPS

Interfaces

Input 3 IEC 61162-1 / 2
1 ITU 823-2
1 PPS input pin
1 TX INHIBIT input pin
Bidirectional 4 IEC 61162-2
1 RS232
Output 1 ITU 823-2 / IEC 61162-1 / 2
1 Alarm relay
1 PPS output pin
1 BIIT output pin
RF 1 BNC for VHF antenna
1 TNC for GPS antenna

Standards

  • IMO A.694(17)
  • IMO MSC.74(69) Annex 3
  • ITU-R M.1084-5
  • ITU-R M.1371-5
  • ITU-R M.493-13
  • ITU-R M.541-9
  • ITU-R M.825-3
  • IEC 61162-1/2 Ed. 4.0
  • IEC 61108-1
  • IEC 61993-2
  • IEC 62288
  • EN 60945 Ed. 4.0
  • STANAG 4668 Ed.1 & 2
  • STANAG 4669 Ed.1 & 2

названия   AMW1103_Rev-6_ENG

Marinsys-Com for Defence

About Marinsys-Com system

b6a615e589b83c6cfb381897325d30f4.jpg

Marinsys-Com System Integrated system

VHF, UHF, MF/HF & Navtex Integrated system

Marcom Marinsys-Com System  consists of Voice operator workstation with Unicom software model NAVIS, 156.025 ÷ 162.025 MHz VHF marine band transceivers, MF/HF transmitters with RF power 500W, 1 kW, 2.5 kW, 4 kW, 5kW and 10kW, working at frequency range from 1.6 to 30MHz (1 Hz resolution)connected to System using IP Network, UHF Air band transceivers, VHF Air band transceivers, VHF/Navtex and MF/HF receivers.

Marinsys-Com System equipped with recording & playback unit, radio server with dedicated software, PSTN Gateway and Network Monitoring system.

Marinsys-Com Control Center

NAVIS Voice operator workstation

433adf254caa1d489becd456c68c8d34

Voice operator workstation model Navis with Unicom software

The operator interacts with the terminal through a touch screen monitor, in addition to the standard mouse and keyboard

The user will also have available, as standard equipment with the terminal, a pair of earphones (with microphone and PTT button),

and integrated speakers

Every operator can interact with the system through specific interfaces, with which it is possible to configure the parameters of the radio

resources available.

The operator can also verify the status of other operators in the network, can make full duplex calls to other terminals or PSTN lines,

and can communicate through text messages.

The main functions of the User Terminal are: 

● Telephone communications;

● Access to the remote radio devices in half duplex mode with transmission enabled by the PTT on the NavisTerminal

● Visualization of the parameters of the radio resource in use (radio type, frequency, channel, status and so on);

● Control of the radio resource in use with the possibility to change channel, frequency and other working parameters;

● Ability to control and manage up to four simultaneous communications;

● Simultaneous reception on several different channels;

● Possibility to send the audio to several conversations at the same time;

● BITE function;

● Possibility to assign and configure audio communication to any output device such as earphones, speakers, and so on.

Marinsys NVIS system server

23d8529cdd846fadc1d1be429f20927f

Marinsys NVIS system server model NVCS-1123

Marinsys NVIS system server model NVCS-1123 with Marinsys NVIS software

Minimum hardware requirements

Processor:
Intel® Xeon® 550 series or more

Operating System:
Linux


Memory
minimum 1Gb

Storage:
minimum 160Gb or more

Power:
Non-redundant, 250W (80+ Silver);
auto-ranging (100V~240V)

Chassis:
1U rack

Voice Recording and Playback system

23d8529cdd846fadc1d1be429f20927f

Voice Recording and Playback server model NVCR-1156

Voice Recording and Playback server model NVCR-1156 with Marinsys ARP web base software

Minimum hardware requirements

Processor:
Intel® Xeon® 550 series or more

Operating System:
Linux


Memory
minimum 1Gb

Storage:
minimum 160Gb or more

Power:
Non-redundant, 250W (80+ Silver);
auto-ranging (100V~240V)

Chassis:
1U rack

NPG-125 PSTN Gateway

ca1fd4fa927be63f2ee557eba7ea5203

The PSTN Gateway NPG-1125 allows the VoIP system

users to be interfaced with PSTN.

The PSTN Gateway has the following features:

Up to 8 FXS and/or FXO ports.

Complete SIP support, DTMF relay.

Codecs: G.711 a-law/μ-law, G.729, G.723, etc.

Easy Management—Web-based management,

command line interface.

GENERAL CHARACTERISTICS

Operating Voltage:

220 VAC – 50 Hz
Power Consumption:  10 W
Dimensions (h x l x d): 483 x 87 x 250 mm
Weight: 2 kg
Working Temperature: +0 °C – +40 °C

Accessories of Marinsys-Com


BMA-123.jpg .     Pedaliera.jpg
.
Cornetta telefonica.jpg .   Cuffia leggera.jpg

VHF, UHF, MF/HF & Navtex Remote site

VHF Coastal Transceiver with secure mode

vhfcs
VHF coastal transceiver model NTR-2224 with secure mode

NTR-2224 is an all-in-one marine VHF transceiver supporting narrowband FM/PM mode (with channel spacing of 25 kHz or 12,5 kHz) designed to comply for safety and general communications.
NTR-2224 has a form factor that enables installation into a standard four-unit rack-mountable module named NSU-1124. Each NSU-1124 can contain up to 4 radios.

Main features of VHF Coastal Transceiver
  • Secure mode
  • Full IP connectivity:
    Wide range of implemented protocols: independent TCP/IP connections (remote client or server), SNMP, SNTP, TFTP for automatic firmware upgrade, HTTP for Web access and remote management.
  • VoIP:
    Customizable VoIP session for audio streaming (including multicast)  and full-IP remote control.
  • Remote control via RS232 and RS422:
    Fully concurrent with IP and VoIP control.
  • BITE:
    Self-monitoring of internal parameters and auto-recovering when fault condition disappears (non-volatile alarm log memory). Alarm signalling on TCP/IP connections, RS232 and RS422, SNMP traps.
  • Data-link function:
    9600 bit/s on 25 kHz channels.
  • Full-duplex capable
  • 600-Ohm dedicated analog input, output and recorder lines
  • On-site operation:
    Keyboard, display and microphone plug for quick on-site tests.
  • Modularity:
    High modularity for easy maintenance.
  • Resilience:
    External structure in aluminium with high immunity to shock and vibrations.
General specifications of VHF Coastal Transceiver
Frequency range: 156.025 ÷ 162.025 MHz
Extended optional range: 146 ÷ 174 MHz
Channel spacing: 25 kHz and 12.5 kHz
Modulation type:  PM (F3E/G3E)
Frequency accuracy: Better than 1 ppm
Switching time Rx/Tx: 10 ms
Power supply: 19.6 ÷ 31.2 Vdc
Dimensions (H x W x D): 173 x 96 x 277 mm
Weight: 2.5 kg
Operating temperature: -20 °C ÷ +55 °C
Storage temperature: -40 °C ÷ +70 °C
Humidity: 95% with T: +25 °C ÷ +55 °C

Transmitter Specifications of VHF Coastal Transceiver
 RF: Adjustable ≤1 ÷ 50 W ±1.5 dB
100W with external amplifier
Antenna port impedence: 50 Ω
Audio bandwidth: 300 ÷ 3000 Hz (25 kHz)
300 ÷ 2550 Hz (12.5 kHz)
Spurious emissions: < 0.25 μW (-36 dBm)
AF distortion: < 5 %

Receiver Specifications
Sensitivity: ≤ 0.25 μV @ 20 dB SINAD dual antenna
Selectivity: ≥ 70 dB
Protection against spurious response: ≥ 80 dB
Protection against intermodulation: ≥ 85 dB
Spurious emission: ≤ 2 nW (-57 dBm)
Receiver SNR: ≥ 40 dB
Audio bandwidth: 300 ÷ 3000 Hz (25 kHz)
300 ÷ 2550 Hz (12.5 kHz)
AF distortion: < 5 %

Standard
  • EN 60950-1 (2006)
  • EN 60950-1 (2006) / A11 (2009)
  • EN 60945 (2002)
  • ETSI EN 301 489-1 V1.6.1 (2005-09)
  • ETSI EN 301 489-5 V1.3.1 (2002-08)
  • ETSI EN 301 929-1 V1.2.1 (2007-02)
  • ETSI EN 301 929-2 V1.2.1 (2007-02)
  • ITU-R M.493-14
  • ITU-R M.541-10

NTR-2224_VHF_brochure

MF/HF transmitters applications

MF/HF Receivers

Marinsys-AeroVHF for Defence Solutions

About Marinsys-AeroVHF Integrated system

bad079b83f4b36b7b8b860741a92c7e4

Marinsys-AeroVHF Integrated system

Marcom Marinsys-AeroVHF System in standard configuration consists of Voice operator workstation with Unicom software model AVIS and 108 ÷ 156 MHz VHF air band transceivers,

connected to System by Radio Gateway module model SRG-1123, using IP Network.

AVIS can manage up to 4 simultaneous communications in standard configuration and up to 8 upon request.

Marcom Marinsys-AeroVHF System can be extended with recording & playback unit and radio server with dedicated software.

According to customer’s requirements there is possible include in System optional units of PSTN Gateway and Network Monitoring system.

All System units can be supplied in redundant configuration    Standard system configuration are:

  • Voice operator workstation with Unicom software model AVIS
  • VHF air band transceiver
  • Radio Gateway module model SRG-1123 for connection MSA-2095 to IP Network

System configuration with recording & playback unit are:

  • Voice operator workstation with Unicom software model AVIS
  • VHF air band transceiver
  • Radio Gateway module model SRG-1123 for connection MSA-2095 to IP Network
  • Recording & Playback server with special software
  • Radio server with special software

Optional:

  • PSTN Gateway
  • Network Monitoring system

Marinsys-AeroUHF for Defence solutions

Marinsys-AeroUHF system consists of Marcom-AeroUHF Control Center & UHF air band transceivers.

 WhatsApp Image 2017-11-19 at 23.29.48

Marinsys-AeroUHF Control center incl.:

  • Voice operator workstation model AVIS with Unicom software
  • Marinsys AVIS system server with Marinsys AVIS software
  • Voice Recording and Playback server model AVCR-1156 with Marinsys ARP web base software
  • APG-125 PSTN Gateway

    Voice operator workstation model AVIS with Unicom software

    433adf254caa1d489becd456c68c8d34

    The operator interacts with the terminal through a touch screen monitor, in addition to the standard mouse and keyboard

    The user will also have available, as standard equipment with the terminal, a pair of earphones (with microphone and PTT button),

    and integrated speakers

    Every operator can interact with the system through specific interfaces, with which it is possible to configure the parameters of the radio

    resources available.

    The operator can also verify the status of other operators in the network, can make full duplex calls to other terminals or PSTN lines, 

    and can communicate through text messages. 

    The main functions of the User Terminal are: 

    ● Telephone communications;

    ● Access to the remote radio devices in half duplex mode with transmission enabled by the PTT on the AvisTerminal  

    ● Visualization of the parameters of the radio resource in use (radio type, frequency, channel, status and so on);

    ● Control of the radio resource in use with the possibility to change channel, frequency and other working parameters;

    ● Ability to control and manage up to four simultaneous communications;

    ● Simultaneous reception on several different channels;

    ● Possibility to send the audio to several conversations at the same time;

    ● BITE function;

    ● Possibility to assign and configure audio communication to any output device such as earphones, speakers, and so on.

  •  

    Marinsys AVIS system server with Marinsys AVIS software

    23d8529cdd846fadc1d1be429f20927fMarinsys AVIS system server model AVCS-1123

    Marinsys AVIS system server model AVCS-1123 with Marinsys AVIS software

    Minimum hardware requirements

    Processor:
    Intel® Xeon® 550 series or more

    Operating System:
    Linux 


    Memory

    minimum 1Gb

    Storage:
    minimum 160Gb or more

    Power:
    Non-redundant, 250W (80+ Silver); 
    auto-ranging (100V~240V)

    Chassis:
    1U rack

     

    Voice Recording and Playback server model AVCR-1156 with Marinsys ARP web base software23d8529cdd846fadc1d1be429f20927fVoice Recording and Playback server model AVCR-1156

    Voice Recording and Playback server model AVCR-1156 with Marinsys ARP web base software

    Minimum hardware requirements

    Processor:
    Intel® Xeon® 550 series or more

    Operating System:
    Linux 


    Memory

    minimum 1Gb

    Storage:
    minimum 160Gb or more

    Power:
    Non-redundant, 250W (80+ Silver); 
    auto-ranging (100V~240V)

    Chassis:
    1U rack

PSTN Gateway model APG-1125

ca1fd4fa927be63f2ee557eba7ea5203

The PSTN Gateway APG-1125 allows the VoIP system 

users to be interfaced with PSTN.

The PSTN Gateway has the following features:

Up to 8 FXS and/or FXO ports.

Complete SIP support, DTMF relay.

Codecs: G.711 a-law/μ-law, G.729, G.723, etc.

Easy Management—Web-based management,

command line interface.

GENERAL CHARACTERISTICS 

Operating Voltage:

220 VAC – 50 Hz
Power Consumption:  10 W
Dimensions (h x l x d): 483 x 87 x 250 mm
Weight: 2 kg
Working Temperature: +0 °C – +40 °C

 

Accessories of Marinsys-AeroUHF

 

UHF Air band TRANSCEIVER

WhatsApp Image 2017-11-19 at 23.29.48

UHF AM Air Band Transceiver model: MSA-2096

MSA-2096 is a transceiver for land-board-land communications in the range of frequencies 225 ÷ 400 MHz .
MSA-2096 has been designed and realized using only electronic components in solid state and elaborated criterions of modularity.
Adopting a technology based on microprocessor, the use of the transceiver (user-friendly approach) becomes extremely simple and its control is furnished of a self-diagnosis system on its operating conditions (Built In Test Equipment – BITE).

 

General specifications

Frequenciy range:  225 ÷ 400 MHz 
Channel spacing: 25/8,33 kHz 
Modulation: AM (A3E) / FM (F3E)
Communication type:  Simplex
Frequency accuracy: Better than 2 ppm
Power supply: 27 Vdc (22 ÷ 30 Vdc)
Power consumption: 6 A @ 27 Vdc in TX with max Rf power
Dimensions (h x w x d): 94 x 264 x 237.5 mm
Weight: 5 kg
Operating temperature: -10° ÷ +55°C
Storage temperature: -40° ÷ +70°C
Relative humidity: 95% (25° ÷ 55° C)

About Marinsys-AeroUHF system

Marinsys-AeroUHF Integrated system

Marcom Marinsys-AeroUHF System in standard configuration consists of Voice operator workstation with Unicom software model AVIS and 225 ÷ 400 MHz UHF air band transceivers,

connected to System by Radio Gateway module model SRG-1123, using IP Network.

AVIS can manage up to 4 simultaneous communications in standard configuration and up to 8 upon request.

Marcom Marinsys-AeroUHF System can be extended with recording & playback unit and radio server with dedicated software.

According to customer’s requirements there is possible include in System optional units of PSTN Gateway and Network Monitoring system.

All System units can be supplied in redundant configuration.

Standard system configuration are:

  • Voice operator workstation with Unicom software model AVIS
  • UHF air band transceiver, 225-400 MHz, 15W in AM & 40W in FM model MSA-2096
  • Radio Gateway module model SRG-1123 for connection MSA-2096 to IP Network

System with recording & playback unit are:

  • Voice operator workstation with Unicom software model AVIS
  • UHF air band transceiver, 225-400 MHz, 15W in AM & 40W in FM model MSA-2096
  • Radio Gateway module model SRG-1123 for connection MSA-2096 to IP Network
  • Recording & Playback server with special software
  • Radio server with special software

Aero Radio Solution for Defence

Marinsys-Aero UHF Integrated system

Marcom Marinsys-AeroUHF System in standard configuration consists of Voice operator workstation with Unicom software model AVIS and 225 ÷ 400 MHz UHF air band transceivers,

connected to System by Radio Gateway module model SRG-1123, using IP Network.

AVIS can manage up to 4 simultaneous communications in standard configuration and up to 8 upon request.

Marcom Marinsys-AeroUHF System can be extended with recording & playback unit and radio server with dedicated software.

According to customer’s requirements there is possible include in System optional units of PSTN Gateway and Network Monitoring system.

All System units can be supplied in redundant configuration.

Standard system configuration are:

  • Voice operator workstation with Unicom software model AVIS
  • UHF air band transceiver, 225-400 MHz, 15W in AM & 40W in FM model MSA-2096
  • Radio Gateway module model SRG-1123 for connection MSA-2096 to IP Network

System with recording & playback unit are:

  • Voice operator workstation with Unicom software model AVIS
  • UHF air band transceiver, 225-400 MHz, 15W in AM & 40W in FM model MSA-2096
  • Radio Gateway module model SRG-1123 for connection MSA-2096 to IP Network
  • Recording & Playback server with special software
  • Radio server with special software

Optional:

  • PSTN Gateway
  • Network Monitoring system

 

UHF Military Air band TRANSCEIVER model MSA-2096

UHF AM Air Band Transceiver model: MSA-2096

WhatsApp Image 2017-11-19 at 23.29.48

MSA-2096 is a transceiver for land-board-land communications in the range of frequencies 225 ÷ 400 MHz .
MSA-2096 has been designed and realized using only electronic components in solid state and elaborated criterions of modularity.
Adopting a technology based on microprocessor, the use of the transceiver (user-friendly approach) becomes extremely simple and its control is furnished of a self-diagnosis system on its operating conditions (Built In Test Equipment – BITE).

 

General specifications

Frequenciy range:  225 ÷ 400 MHz 
Channel spacing: 25/8,33 kHz 
Modulation: AM (A3E) / FM (F3E)
Communication type:  Simplex
Frequency accuracy: Better than 2 ppm
Power supply: 27 Vdc (22 ÷ 30 Vdc)
Power consumption: 6 A @ 27 Vdc in TX with max Rf power
Dimensions (h x w x d): 94 x 264 x 237.5 mm
Weight: 5 kg
Operating temperature: -10° ÷ +55°C
Storage temperature: -40° ÷ +70°C
Relative humidity: 95% (25° ÷ 55° C)

 

Receiver specifications

Sensitivity: ≤ 2.5 uV @ 12 dB SINAD in AM
Selectivity: ≥ 6 dB @ ± 7.5 kHz
≥ 60 dB @ ± 18 kHz in FM
Protection against spurious response: > 60 dB
Irradiation of interferencies: ≤ 2 nW (-57 dBm)
Background noise: ≤ 45 dB
Image frequency rejection: > 80 dB
Audio band: 300 ÷ 3000 Hz
AF Distortion: ≤ 5 %
Audio output for loud-speaker: 4 W / 4 Ω

 

Transmitter specifications

Power RF max: ≥ 15 W (AM) & 40W (FM)
Impedance: 50 Ω
Audio band: 300 ÷ 3400 Hz
Spurious and harmonics attenuation: < 60 dB
AF Distortion: < 5 %

OTHER FEATURES

  • Input functions (frequencies selection, squelch definition, selection of the power RF, etc.) to manage from the keyboard
  • Output data represented on display
  • Possibility of connection by serial RS232/422 with remote control
  • System of self-control and self-diagnosis (BITE)
  • Possibility of connection with centralized system

Standards

  • NAV-30-A002
  • NAV-30-A001, gr.B, cl. II

 

Coastal Radio Communication Solutions for Coast Guard

About Coastal Radio Communication Solutions

Coastal Radio Communication Solutions

Our company offers wide range of complete turnkey system solutions for built Coastal Radio Communication Systems.

We are flexible, will find match, and will comply with any kinds of any customer’s requirements.

Our Coastal Radio Communications solutions represent the following systems: Marinsys-Com, Marinsys-VHF,

Marinsys-MF/HF, Marinsys-VHF-RX, Marinsys-MF/HF-RX and Marinsys-Navtex-RX.

Have practical experience of using 50 base stations.

System architecture, the technical capabilities of the hardware and software of a Coastal Radio Communication Systems enables

full integration of unlimited number of local and remote base stations with allow full redundancy of all system components.

Coastal Radio Communication Solutions

UHF FM 400/470 MHz Transceiver

UHF FM 400/470 MHz Transceiver

The MSA-1067 is an apparatus transceiver rack designed and built for the communications between the tower control (TWR) and the operators present within the airport area in the range of frequency UHF 400 ÷ 470 MHz mode FM narrow.
MSA-1067 has been made with the use of solid-state electronic components and criteria of modularity pushed.
The adoption of a technology based on the microprocessor makes it very easy to use transceiver approach (user-friendly), and the control of the same being provided with a self-diagnosis system of the state of operation (BITE).

Main features

  • Input functions (selection frequencies, setting the squelch, selecting RF power, etc.,) which can be controlled from the keyboard (INPUT)
  • Output data represented on the display (OUTPUT)
  • Selective call code ZVEI1, ZVEI2, CTCSS, CCIR
  • Possibility of connection with remote control and with the unit switching apparatus of the primary and reserve
  • Ability to link with centralized system
  • The system of self-control and self-diagnosis (BITE)

Technical features

  • Frequency: 400 ÷ 470 MHz
  • Channeling: 12.5 kHz
  • Modulation: FM narrow band
  • Frequency stability: 2 ppm
  • Power Supply: 110 / 220 Vac ± 10%, 12 Vdc – 24 Vdc
  • Dimensions (h x w x d): 88 x 482 x 500 mm (2 unit rack std 19″)
  • Weight: 12 kg
  • Operating temperature: -30 °C ÷ +50 °C

Receiver”s features

  • Sensitivity: ≤ 0.5 µV @ 20 dB SINAD
  • Selectivity: ≤ 70 dB @± 25 kHz
  • Protection responses spurious: ≤ 70 dB
  • Protection from intermodulation: ≤ 60 dB
  • Irradiation parasite: ≤ 2 nW
  • Background noise: ≤ 40 dB
  • Rejection image frequency: ≤ 80 dB
  • Audio band: Between -1 dB and +3 dB with respect to the curve deenfasi at 6 dB/octave from 300 to 3000 Hz.
  • Audio output loudspeaker: 1 W / 8 Ω

Transmitter”s features

  • RF output power: 15 W nominal with the possibility of a reduction
  • Impedance: 50 Ω
  • Audio band: Between -1 dB and +3 dB with respect to the curve dipreenfasi at 6 dB/octave from 300 to 3000 Hz.
  • Harmonic emissions and spurious: < 0.25 µW
  • Distortion: < 5 %

Military V-UHF AM/FM 225/400 MHz Transceiver model MSA-2096

V-UHF AM/FM 225/400 MHz Transceiver

The MSA-2096 is a device transceiver car designed and built for the communications voice range of frequencies V-UHF 225 ÷ 400 MHz, FM narrow and AM modes.
The MSA-2096 has been accomplished with the comprehensive use of solid-state electronic components and criteria of modularity pushed.
The adoption of a technology based on the microprocessor makes it very easy to use transceiver approach (user-friendly) and is provided with a self-control system of its own capabilities (BITE).

Main features

  • Input functions (selection frequencies, setting the squelch, selecting RF power, etc.,) which can be controlled from the keyboard (INPUT)
  • Output data represented on the display (OUTPUT)
  • Possibility of connection with remote control
  • The system of self-control and self-diagnosis (BITE)

Technical features

  • Frequency: 225 ÷ 400 MHz
  • Channeling: 25 kHz and 8.33 kHz
  • Modulation: AM (A3E), FM (F3E))
  • Mode of operation: voice
  • Accuracy of frequency: 1 ppm
  • Current: 7 A @ 24 Vdc in TX maximum RF output power
  • Dimensions (h x w x d): 94 x 264 x 237.5 mm
  • Weight: 5 kg
  • Operating temperature: -10° ÷ +55°C
  • Temp.storage: -40° ÷ +70°C
  • Relative humidity: Up to 95% (25°÷ + 55° C)

Receiver”s features

  • Sensitivity: ≤ 2.5 µV @ 12 dB SINAD in AM/≤ 1 µV @ 20 dB SINAD in FM
  • Selectivity: ≤ 6 dB @ ± 7.5 kHz ≤ 60 dB @ ± 18 kHz in FM ≤ 75 dB in the AM
  • Protection against the answers stray: ≤ 60 dB
  • Irradiation parasite: ≤ 2 nW (-57 dBm)
  • Background noise: ≤ 40 dB
  • Rejection image frequency: ≤ 70 dB
  • Audio bandwidth: 300 ÷ 3400 Hz to 6 dB in the AM. 300 ÷ 3000 Hz with filter deenfasi FM
  • Audio output speaker: 4 W / 4 Ω

Transmitter”s features

  • RF power: Not less than 15 watts carrier in the AM (40 W PeP with modulation = 80%)
  • Not less than 40 W in FM
  • Impedance: 50 Ω
  • Audio bandwidth: 300 ÷ 3400 Hz to 6 dB in the AM. 300 ÷ 3000 Hz with filter pre-emphasis in FM
  • Attenuation spurious and harmonics: > 60 dB
  • Distortion: < 5 %

Standards

  • NAV-30-A002
  • NAV-30-A001, gr.B, cl. II

Navtex Control center

FTP server model: MSFS-1132

  • Server for prepare, collect, store NAVTEX system messages.
  • Integrated with Marinsys-Navtex Emissions Manager software.

Minimum hardware requirements

Processor:
Intel® Xeon® 550 series or more

Operating System:
Windows

Memory
minimum 1Gb

Storage:
minimum 160Gb or more

Power:
Non-redundant, 250W (80+ Silver);
auto-ranging (100V~240V)

Chassis:
1U rack


Back Home

Navtex transmitters 490/518/4209.5 KHz

1KW NAVTEX transmitter model: MSM-713-X

● Navtex transmitter(1KW Transmitter) 490/518/4209.5 KHz.
● Remote control of 1-16 transmitters from a PC.
● Spanish design and manufacturing.
● Operation frequency: 490/518/4209.5 KHz.
● Operation power: 1Kw.
● Navtex communications.
● Remote control: RS232.
● SWR tolerance: infinite.
● High performance: type D amplification

Complete solid state. Built with modular technique for an easy repairing.
Amplifying technology of Class D for a high performance and low consumption.
Appropriate for use in Navtex communications

GENERAL SPECIFICATIONS

Solid state.
High performance.
Power 1kW ±1dB.
Remote Control RS232.

ELECTRICAL SPECIFICATIONS

Operation frequency 490/518/4209.5 KHz.
Frequency Stability 0.5ppm.
Output power 1KW ±1dB.
Power regulation WT; W/2; W/4; W/10.
Harmonics Less than -55dB.
Out of band spurious Less than -55dB.
ROE Tolerance Infinite.
Antenna connector type N.
Transmission type F1B.
Modulation speed 100 bauds Deviation ±85 Hz.
Modulation inputs Data input.

POWER SUPPLY SPECIFICATIONS

Power Supply 220VAC. ±20%.
Frequency 50/60 Hz.
Used power in transmission 1.5Kw.
Optional: Three-phased power supply ±20%. 220 Vac. 380 Vac. 440 Vac.
Frequency 50/60 Hz.

MECHANICAL SPECIFICATIONS

Width 470 mm. Depth 430 mm.
Height 210 mm.

ENVIRONMENTAL SPECIFICATIONS

Operation temperature -10 a 60ºC.
Storage temperature -30 a 80ºC.
Humidity 90%.

 

Marinsys-Navtex system

The Marinsys-Navtex System is based in a Server/Client architecture that allows the maximum reliability, flexibility and scalability by using independent units. It has an efficient intercommunication between the units for a limited consumption of broad band in order to guarantee the operation of the Navtex transmission system regardless the communication availability between the units and centres.

The four important characteristics that distinguish the Marinsys-Navtex system are:

A single manager can operate up to 8 coastal stations, with the possibility of working in the 490KHz, 518KHz and 4209.5KHz with automatic control of all its parameters.
The system has in each coastal station a transmissions local controller (Navtex remote control) with all the information stored that comes previously from the Navtex operation manager in order to establish automatic and independent transmissions of the operation manager and its communication. This avoids the communication breakdown problems between the control center and the coastal station.
The system can be configured with independent transmitters for each of the operation frequencies or with a single Invelco transmitter that allows operating in the three frequencies.
Possibility of redundant communication between the operation manager and each coastal station. Up to 3 different IP channels of communication.

The main units of the system are:

  • Automatic Navtex coordinator workstation (ARM-78)
  • Automatic Navtex operator workstation (ARM-77 with Marinsys Navtex Emissions Manager software)
  • Navtex Remote Control (MSRC-400-A).
  • FTP server (MSFS-1132).
  • Navtex Transmitter (MSM-7xx-x series).
  • Coastal Navtex receiver

The Navtex Transmission System has the possibility of simultaneously manage the transmissions in 518 KHz, 490 KHz and 4209.5 KHz frequencies of one (1) to eight (8) Navtex Transmission stations.
Each station is defined in the system individually with its own characteristics (station code, operation frequencies, schedules (time slots), transmitters, power levels, etc.)

AIS Data Service for Mobile Applications

AIS Data Service for Mobile Applications

xScreenshot-2.png.pagespeed.ic.uU6dyU4xKi.png   xSonar-1.png.pagespeed.ic.s9SPMeOm9w.png

This service works with iNavX™ – Marine Navigation App for iPhone, iPod touch and iPad version 3.1.7 or later.

xScreenshot-2.png.pagespeed.ic.uU6dyU4xKi.png xSonar-1.png.pagespeed.ic.s9SPMeOm9w.png

If you want to use this service:

Enter the following in the iNavX TCP/IP NMEA Client
Host: inavx.web-ais.net
Port: 9991
Location Services: ON
Disconnect Alarm: ON
Enter the following in the SiiTech Account accessed by the “Account” button on the iNavX TCP/IP NMEA Client
Account: your_login
Password: your_password
After connecting you will see AIS targets within 30NM of your device position.
Disclaimer of Warranty and Limitation of Liability
THE SERVICE AND AIS DATA ARE BEING PROVIDED BY SIITECH TO USER ON AN “AS IS, WITH ALL FAULTS” BASIS. SIITECH MAKES NO WARRANTIES OF ANY KIND WITH RESPECT TO THE SERVICE OR AIS DATA.

IN NO EVENT SHALL MARCOM BE LIABLE TO USER OR ANY OTHER PARTY FOR ANY CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES OR COSTS (INCLUDING ATTORNEYS’ OR EXPERTS’ FEES), INCLUDING LOSS OF DATA, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING FROM THE USE OF THE SERVICE OR AIS DATA OR OTHERWISE ARISING OUT OF OR RELATED TO THE SERVICE OR AIS DATA, WHETHER OR NOT MARCOM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR COSTS.

AIS Environmental Health Protection Solution

AIS Environmental Health Protection Solution

Без названия (2).png

The AIS Environmental Health Protection Solution is based on the Marcom product and represents an efficient tool for environmental protection.

“The ports of Los Angeles and Long Beach are responsible for more than 100 tons per day of smog- and particulate-forming nitrogen oxides (NOX) – more than the daily emissions from all 6 million cars in the region.” – William A. Burke, chairman of the South Coast Air Quality Management District
The largest amount of emissions (53%) is generated by ships approaching the port. Ship speed reduction programs requesting ships to slow down from 20-25 knots to 12 knots at a distance of 20 nautical miles from the port could reduce emissions by up to 80%. The Internet-based online AIS marine traffic monitoring system assists competent authorities to:

Detect and identify AIS-equipped ships at the earliest stage of arrival
Track AIS targets
Create a speed-limited zone
Generate automatic alarms when ships violates the speed limit within a zone
Send automatic speed violation email notifications
Send automatic AIS warning messages to ships
Generate speed violation reports
Investigate violations (unlimited history replay function)
This solution supports S57 and S63 nautical charts, Open Street, Bing and Google maps.

AIS Environmental Health Protection Solution
20 nautical miles zone at Long Beach

AIS Boat Charters Solution

AIS Boat Charters Solution

The AIS Boat Charters Solution is an affordable Internet-based boat traffic monitoring system for charter companies of all sizes.

The Internet-based online AIS marine traffic monitoring and management system assists shipping companies to:

Control fleet in real time
Investigate accidents (unlimited history replay function)
Receive Actual Time of Arrival notifications at any predefined zone
Receive Actual Time of Departure notifications at any predefined zone
Calculate an Estimated Time of Arrival to any desired point(s)
Send messages to AIS-equipped ships
Receive messages from AIS-equipped ships
Create sophisticated reports
Trigger alarms
Make decisions in operational actions
This solution supports S57 and S63 nautical charts, Open Street, Bing and Google maps.

 

Без названия.png

AIS Aids to Navigation Management Solution

AIS AtoN Management Solution is based on Marcom products and provides an affordable AtoN management system for AtoN maintenance authorities.

ais aton.png

The Internet-based online AIS AtoN management system assists AtoN maintenance authorities to:

  • Control the position and status of AIS AtoN in real-time
  • Build a guardian zone around AtoN
  • Trigger guardian zone violation alarms
  • Control movements of AIS-equipped ships around AtoN
  • Investigate accidents (unlimited history replay function)
  • Create sophisticated reports about movements of AIS-equipped ships around AtoN
  • Instantly deploy emergency virtual AtoN and broadcast its position to passing ships
  • Send safety messages to AIS-equipped ships
  • Receive messages from AIS-equipped ships
  • Make decisions in operational actions

This solution supports S57 and S63 nautical charts, Open Street, Bing and Google maps.

Marcom Underwater Pipeline/Cable Surveillance and Protection Solution

Marcom Underwater Pipeline/Cable Surveillance and Protection Solution

siitechbutton8
Underwater Pipeline/Cable Surveillance and Protection Solution is based on the Marcom AIS Server and Marcom Web VTS products and provides an affordable system for monitoring marine traffic around underwater oil/gas pipelines and power lines.

Solution Highlights:

  • Automated monitoring of pipeline and cable routes using ship AIS position reports
  • User defined alarms for different conditions
  • Fast and simple zone creation using geographical coordinates of pipelines or cables
  • Sending safety messages to AIS equipped ships
  • Sending emails and SMS alerts to any authorities
  • Receiving messages from AIS equipped ships
  • Unlimited ship movement history
  • Accident investigation support (unlimited history replay function)
  • Creating sophisticated reports regarding movement of AIS equipped ships around pipelines and cables
  • Supports S57 and S63 nautical charts, Open Street, Bing and Google maps

You may create protected zones around your cables and generate alarms when ships enter this restricted zone:

Без названия.png

Alarm Events window showing alarms triggered as a result of setting up the cable:

Без названия (1).png